APRS School and Set Up Meeting

APRS is challenging and intimidating but a useful tool in our hobby. discuss APRS in this forum.
hmfigueroa

Re: APRS School and Set Up Meeting

#61

Post by hmfigueroa » Thu Sep 17, 2009 8:04 am

I wouldn't necessarily call it successful, but I did get it to work.

James you will need to configure the Kenwood tnc to work throuugh the AGW packet engine. Then connect agwtracker to the packet engine.

The way I did it was to configure a sound card interface into the Kenwood external data port. I then used that for monitoring and let the on-board APRS functionalty work on the kenwood.

I think I documented that setup in another thread. I will need to check that out and I will add that link later.

This I hope should give you some direction.

Post Reply

Return to “APRS (AUTOMATIC PACKET REPORTING SYSTEM)”

Who is online

Users browsing this forum: No registered users and 1 guest