Question for the Engel MT60/80 folks... (fridge slide)

Camping gear, hiking equipment, vehicle equipment, kitchen and food preparation gear, etc.
Post Reply
User avatar
Chazz Layne
Posts: 720
Joined: Tue Aug 26, 2008 7:39 pm
Call Sign: KF7FEN
Location: Prescott, Arizona
Contact:

Question for the Engel MT60/80 folks... (fridge slide)

#1

Post by Chazz Layne » Fri Sep 04, 2009 3:10 pm

How much total height does the Engel fridge slide add to the fridge? Specifically, the one on the left that the fridge sits down inside... looks to be about half an inch but I haven't been able to confirm that.

I want an Engel MT60 Combi, but I am vertically challenged to about 18.625 inches... :shock:
Chazz Laynedotcom

User avatar
DaveK
Site Admin
Posts: 3421
Joined: Tue Mar 11, 2008 10:33 am
Call Sign: K6DTK
Location: Southern California

Re: Question for the Engel MT60/80 folks... (fridge slide)

#2

Post by DaveK » Fri Sep 04, 2009 3:43 pm

Chazz:

You may want to check with Hawkeye, here on this forum. He may be able to build you a low profile slide out tray that will meet your requirements. Good luck.
DaveK
K6DTK


Extremism in the defense of liberty is no vice.
Moderation in the pursuit of justice is no virtue.

sdnative

Re: Question for the Engel MT60/80 folks... (fridge slide)

#3

Post by sdnative » Fri Sep 04, 2009 7:02 pm

DaveK wrote:You may want to check with Hawkeye
He's busy right now dodging fires. He was evacuated from his home in Yucaipa :shock:

User avatar
Chazz Layne
Posts: 720
Joined: Tue Aug 26, 2008 7:39 pm
Call Sign: KF7FEN
Location: Prescott, Arizona
Contact:

Re: Question for the Engel MT60/80 folks... (fridge slide)

#4

Post by Chazz Layne » Sat Sep 05, 2009 3:14 pm

Doh, I hope he and his house come out unscathed. I remember the Laguna fires in the 90s... not fun.
Chazz Laynedotcom

FriZer
Posts: 1
Joined: Sun Aug 22, 2010 8:20 pm

Re: Question for the Engel MT60/80 folks... (fridge slide)

#5

Post by FriZer » Wed Aug 25, 2010 7:22 am

Chazz is your problem is solve? I am really curious what you did in that case. I really cannot control myself asking when I got so curious. So what happen in your problem Chazz?

User avatar
Chazz Layne
Posts: 720
Joined: Tue Aug 26, 2008 7:39 pm
Call Sign: KF7FEN
Location: Prescott, Arizona
Contact:

Re: Question for the Engel MT60/80 folks... (fridge slide)

#6

Post by Chazz Layne » Wed Aug 25, 2010 9:35 am

I ended up with a change in plans... I wanted more storage space as well, so I'm building around the smaller MT35 freezer/fridge. The MT35 will have no trouble at all fitting in that space, fridge slide included. :)
Chazz Laynedotcom

Post Reply

Return to “EQUIPMENT”

Who is online

Users browsing this forum: No registered users and 1 guest